Engraving a Diploma on a Wood Plaque
Graduates work hard to get their diploma commemorating their achievement, hard work and dedication. Here we'll show you how to turn that coveted piece of paper into a permanent memory that will last a lifetime!
Of course this file is just to create your own sample, as artwork will vary by customer. But this is a great way to showcase your laser work and expand your product offerings!
A custom wood engraved diploma is a great keepsake for any graduate.
The diploma can be placed at the top-right corner of the table for easy setup.
The finished engraving on a maple plaque provides a nice subtle contrast.
For this project, we used a 50-watt Helix with the following settings:
Raster Settings: 100% speed, 100% power, 600 dpi, stucki dithering
Adjust the settings for your laser and wattage using the suggested settings from the manual.
Open the file and modify the design as you would like. Make sure the graphic is centered before you print.
Next, insert the plaque into your laser and send over the file.
If you're satisfied with the depth of engraving and overall look, remove the plaque and wipe off excess wood residue with a damp cloth. That's all there is to it!
Get More Information
We'll send you a brochure, as well as engraved and cut samples created with the laser.
Visit our full Sample Club for more ideas of what you can create with a laser system from Epilog.
View our full line of Co2 and Fiber laser engraving and cutting systems to see which is right for you.
Alfex LaserMELBOURNE | SYDNEY | BRISBANE | ADELAIDE | PERTH
17 Military Road, Broadmeadows
Victoria, Australia 3047
P: 1300 20 15 10 (Australia only)
P: (+61) 3 9359 0688 (International)
E: Send a message
Tech Support: Send a message
Portions of this page translated by Google.