How to Laser Engrave Stainless Steel Tumblers
Stainless steel tumblers are perfect for keeping your favorite beverage at its desired temperature for an extended period. Follow these easy steps to add a personalized flare to your traveling companion.
Whether you use a CO2 laser with Cermark or an Epilog fiber laser, you can create stunning results making these tumblers truly one of a kind.
Laser marked stainless steel tumblers.
Open file and adjust settings. (CerMark)
Open file and adjust settings. (FiberMark)
FiberMark rotary engraving of the tumbler.
Remove CerMark or residue by handwashing
CerMark and FiberMark Results
For CerMark, we used a 50-watt Helix with the following settings: Speed: 50% // Power: 100% // DPI: 600
For Fiber, we used a 30-watt Fusion M2 with the following settings: Speed: 6% // Power: 100% // Freq: 3
CerMark: To start, spray your tumbler or other tumbler with an even coat of CerMark over the desired engraving area. Let dry for at least 5 minutes.
Open the file and adjust the settings according to your laser's wattage. Send your job to the laser.
Place the tumbler in the rotory and set the focus. Press "go" and watch as the laser leaves a permament mark.
Simply rinse away the CerMark or residue to reveal your beautifully contrasted design on your tumbler!
For more information on how you can use an Epilog Laser system for custom etching of tumblers, and much more,
Get More Information
We'll send you a brochure, as well as engraved and cut samples created with the laser.
Visit our full Sample Club for more ideas of what you can create with a laser system from Epilog.
View our full line of Co2 and Fiber laser engraving and cutting systems to see which is right for you.
Alfex LaserMELBOURNE | SYDNEY | BRISBANE | ADELAIDE | PERTH
17 Military Road, Broadmeadows
Victoria, Australia 3047
P: 1300 20 15 10 (Australia only)
P: (+61) 3 9359 0688 (International)
E: Send a message
Tech Support: Send a message
Portions of this page translated by Google.