Wood Business Cards Engraved with a Laser
Laser cut wooden business cards are a quick and easy alternative to traditional cards that can get lost in the shuffle. Plus (with the right amount of detail) they showcase the precise results you can provide with your laser.
For engravers, these cards can be made quickly and easily from endless scrap materials. For customers they are a sophisticated-looking and memorable way to establish their brand.
Wood: planks or scrap - no thicker than 1/4 inch. We used planks from
Colorado Heirloom, and we also used wood veneer that came from Amazon and ranged from 1/32" to 1/28" thickness.
An Epilog Laser System
We used a 60-watt Helix with the following settings for the wood planks: 100% speed, 100% power for engraving, 30% speed, 60% power, 500 frequency for cutting.
For the veneer we used settings of 90% speed, 40% power for the engraving and 50% speed, 30% power, 500 frequency for the cutting.
Open the file sc_wood_card.cdr. Select the card(s) you want to engrave and personalize to fit your needs. Then, insert the wood in the laser.
Send the job to the laser with the correct setting for your machine and press go!
Get More Information
We'll send you a brochure, as well as engraved and cut samples created with the laser.
Visit our full Sample Club for more ideas of what you can create with a laser system from Epilog.
View our full line of Co2 and Fiber laser engraving and cutting systems to see which is right for you.
Alfex LaserMELBOURNE | SYDNEY | BRISBANE | ADELAIDE | PERTH
17 Military Road, Broadmeadows
Victoria, Australia 3047
P: 1300 20 15 10 (Australia only)
P: (+61) 3 9359 0688 (International)
E: Send a message
Tech Support: Send a message
Portions of this page translated by Google.