Epilog Legend 36EXT Firmware and Driver Downloads
Driver Update Notification Signup
Signup to receive email notification when a new driver or firmware is available for your laser model.
Epilog 36EXT Driver 9.03 (01/07/2015)
Replaces version 9.02 (9/29/2014)
Warning! If you are using DAT files in your driver you must update them with the DAT converter software below. Fix for vector sorting commands sent to Job Manager.
Adds support for the Epilog Job Manager.
Download individual files. Download
Epilog Job Manager 1.3.6 (01/15/16)
Replaces 1.3.5 (11/23/2015)
Improves how the software handles hairline vector lines that extend off the edge of the page. This change only affects the Fusion Laser Series.
Please note: Remove previous version of Epilog Job Manager before installation! (Go to Control Panel > Programs and Features and remove the software.)
Please note: Windows 7/8/10 is required to use the Epilog Job Manager.
Firmware: 126.96.36.199 (02/04/11)
This firmware update implements changes to satisfy CE requirements. All laser systems requiring CE certification will be shipped with the Europe option set to Yes. A Yes setting will prevent the carriage from moving and the laser from firing if either interlocked door is open.
Read Install Instructions. Download Now
Have a question we can help you with?
Portions of this page translated by Google.