Skip to main content
Home  /  Technical Support  /  Driver Updates  /  Fusion Edge, Maker, Pro, & Galvo Drivers

Firmware & Driver Downloads

Fusion Edge / Maker / Pro / Galvo

Signup to receive email notification when a new driver or firmware is available for your laser model.

Software/Firmware for Fusion Maker, Fusion Edge, Fusion Pro, & Fusion Galvo Laser Systems.

Epilog Software Suite 2.2.13.6 ( 11/27/2023 )

Please note: Beginning in January of 2023, Epilog Laser will no longer be supporting 32-bit operating systems with upgrades of the Epilog Laser Software Suite. If you are currently using a computer with only a 32-bit operating system, you can continue to use versions of our software released before January 1, 2023. After this date, future updates to the software with the latest features will only be offered in a 64-bit versions.
  • Everything you need to run your Fusion Maker, Edge, Pro, or Galvo system
  • Installs the Epilog Job Manager and the Epilog Laser Dashboard

Version 2.2.13.6 Release Notes

  • Bug fixes and improvements

– For more information on the Job Manager, click here.
– Download Software Suite install and use instructions.
– For information on how to use the Construction Lines feature, click here

Please note: Remove previous version of Epilog Job Manager and Epilog Software Suite before installation! (Go to Control Panel > Programs and Features and remove the software.)

Minimum Requirements:

  • Windows 7, Windows 8.1, Windows 10, or Windows 11
  • Operating system should have all system updates before installation
  • Support for OpenGL 3.0 (or higher) or OpenGL 2.0ES (or higher)
  • 4GB RAM or more
  • 2 processor cores or more
  • Processor can be any Intel i3/i5/i7, AMD Ryzen 3/5/7, AMD A4/A6/A8/A10/A12/FX
  • Integrated gigabit ethernet is not required, but is nice to have.

Recommended Specifications:

  • 8GB RAM or more
  • 4 processor cores or more
  • Processor can be any Intel i5/i7, AMD Ryzen 5/7, AMD A6/A8/A10/A12/FX

Epilog Software Suite 2.2.13.6


Firmware: 1.0.9.0 ( 2/12/2024 )

Please note:
  • All machines can only be reverted to their previous 1.0.8.x version after updating to 1.0.9.0.
  • You can only update to 1.0.9.0 from a 1.0.8.x version.

New Features/Enhancements

  • 1.0.9.0 firmware streamlines and provides a more robust update experience once installed.
  • Various bug fixes & enhancements

Vector Match Instructions and Notes:

Vector Match and Vector Match Distance settings allow the user to adjust the connecting points of vector cut objects such as circles.

This firmware upgrade is only necessary if the connecting points on objects like circles do not match. There are no other enhancements to this firmware.

Instructions for adjusting Vector Match and Vector Match Distance can be downloaded here:

Firmware FAQ’s:

  • How do I know what firmware version I have?
    If you have older firmware, you can determine your firmware version under Settings (gear icon) > Version on the control panel. If your firmware version is newer, it will be listed at the bottom of the settings menu.
  • How often will I receive firmware updates?
    If you have signed up for firmware updates, we only send new versions to customers when there are feature updates or large bug fixes. Incremental changes are only released to new production machines, and don’t need to be updated in your machine if you are not experiencing issues.

Users must be using version 1.0.4.5 prior to updating to any newer firmware versions

Please note: Anything below 1.0.3.0 must go through 1.0.4.5 before proceeding to a newer firmware.
  • A machine is on 1.0.2.x they must go to 1.0.4.5 first then to a final firmware version
  • A machine is on 1.0.3.x or greater they can go to the latest firmware version